INTERLOCKING GARAGE FLOORING
TOUGH TILE
Say goodbye to the old dusty concrete look!
Find out more!



Why Tough Tile?
Our Interlocking Tough Tiles are an ideal flooring solution to a dusty unattractive concrete garage or workshop floor. Manufactured in the UK using hardwearing PVC, Tough Tiles will keep your floor looking great for years to come. Designed to last, interlocking Tough Tiles create an impact absorbing, slip resistant and anti-fatigue surface that will not crack, chip or dent. Engineered with a hollowed out grid system to bridge the voids of uneven surfaces such as rippled concrete garage floors and to provide a thermal cushion between the cold concrete floor and the interlocking tile above.
Versatile
Movable & reusable •
Low life cycle costs •
Easy to install, clean and maintain •
No downtime during fitting & installation •

Resistant
Rated: BS EN 7188 •
Fire retardant: BFL-S1 •
Protects existing floor from damage •
Good anti-fatigue properties •

Resilient
Durable & hard-wearing •
Not to be confused with EVA foam alternatives •
Handles non-centre point heavy loads •
Resistant to many household solvents •


Practical
• Reduces dust generated by concrete floors
• Reduces damage caused by impact
• Insulates the floor, reduces damp & noise
• Accommodates many uneven or rippled floors

Environmental
• Manufactured in the UK
• Black tiles are made from 100% recycled PVC
• Widely recyclable
• Sustainable

Design
• Light in weight but strong when interlocked
• Can be interlocked side by side or off-centre
• Allows water to evaporate over time
• Made from Polyvinyl Chloride (PVC)
How do they work?
The Tough Tile Interlocking Flooring System has been engineered with a wide reinforced locking system that allows the Tough Tiles to fit together like puzzle pieces. The extra surface area around the joints creates a very strong connection. This unique joint allows vehicles to drive and turn on the Tough Tiles without separating the tiles or pulling them apart. The tiles do not require any adhesives and for the most part, any floor preparation to be laid.


How do we compare?
Being suppliers and fitters of our products gives us a unique and in-depth understanding of what really goes into a professional fitting of interlocking flooring systems. We have fitted all types of interlocking tiles throughout the years and know exactly the amount of planning and problem solving that goes into a professional fitting. We have the right tools, the experience of time, and the knowledge to get the job done right.
Available In Two Designs & Five Colours
Our UK manufactured Interlocking Garage & Workshop Floor Tiles are available in two different surface designs, Raised Diamond or Raised Disk. Both designs are fully interchangeable to suit your requirements.
Ramped Edges For Garage & Entrance Doors
Interlocking garage floor ramped edges are available in both Raised Diamond & Raised Disk finishes.
Some Of Our Work
Technical Details
Raised Diamond Tile

Size: 495mm Wide X 495mm Long X 14mm Thick
Interlocked Size: 470mm X 470mm
Squared Interlocked Size (4 Tiles): 0.9m²
Tile Weight: 1.8kg / Tile - 7.2kg / 0.9m²
Reaction to Fire Classification: BFL – S1
Slip Resistance: BS EN 7188
Raised Disk Tile

Size: 495mm Wide X 495mm Long X 12mm Thick
Interlocked Size: 470mm X 470mm
Squared Interlocked Size (4 Tiles): 0.9m²
Tile Weight: 1.8kg / Tile - 7.2kg / 0.9m²
Reaction to Fire Classification: BFL – S1
Ramp Edges

Female Ramp
Size: 495mm x 60mm
Weight: 0.175kg

Male Ramp
Size: 495mm x 85mm
Weight: 0.220kg
How Much Will It Cost?
Few Examples
Of Garage Sizes & Costs
2.4m x 4.9m (8f x 16f)
Small Single Garage
66 Interlocking Black Tough Garage Floor Tiles
5 Interlocking Tough Ramp Edges
Supplied price for DIY installation:
£239.89 + VAT
A guide price for our professional installation:
£75 to £100 + VAT
2.7m x 5.5m (9f x 18f)
Medium Single Garage
72 Interlocking Black Tough Garage Floor Tiles
6 Interlocking Tough Ramp Edges
Supplied price for DIY Installation:
£262.74 + VAT
A guide price for our professional installation:
£82 to £120 + VAT
3m x 6.1m (10f x 20f)
Large Single Garage
91 Interlocking Black Tough Garage Floor Tiles
7 Interlocking Tough Ramp Edges
Supplied price for DIY installation:
£330.96 + VAT
A guide price for our professional installation:
£104 to £140 + VAT
Installed pricing is based on average installation times and local installation. The price will depend on the garage floor quality and the number of columns in the garage. Although unlikely we may advise that the floor be screaded and self-leveled depending on its condition. To receive a free and bespoke quote please contact us directly.
Garage Floor Tough Tile Calculator
Enter The Garage Dimensions Below
Interlocking Garage & Workshop Installation Service
Factory Cut Every Time
Our 26" Guillotine makes quick work of tough PVC tiles to create an appealing & seamless factory cut finish. We also have the equipment to ease hand cuts around pillars or posts while at the same time making sure the correct expansion gap is applied wall to wall.
Professional & Friendly Service
Customer satisfaction is our number one priority. When you contact us you will be dealing with our dedicated, professional & friendly staff.
Correct Floor Centering
We make sure the interlocking tiles are centered in the garage to provide the best aesthetics and also to use the least amount of tiles for the job.
Base Floor Inspection
Our interlocking tiles are designed with a grid like pattern to accommodate minor imperfections in the floor. However, in some instances the concrete floor needs to be repaired and made smooth. This is something we check for when providing you with a quote.
Fully Insured Installation Service
All our installations are carried out by our own fitters from start to finish. We take the utmost care to ensure we leave your premises the way we found them but with a hardwearing new floor.
Accurate Quotes
The quote that we provide you with is fixed. Our calculation is based on a complete total of tiles and ramps required to do the job plus our discounted installation cost. As a guide a medium sized garage (9ft by 18ft) should take us around 4 hours to complete, and on average cost under £450 including installation and VAT .
DIY Installations
If you prefer to buy the loose product from us and do the installation yourself we will provide you with us much assistance as we can. Please contact us for details.